Door Closing Sound Problem

[Seangwong]

doorcls.wav and dooropn.wav
should be located in the main folder of the train. It should not be located in other folders such as, car, etc.

If you have doorcls.wav and dooropn.wav
files in the main folder but there is still isn't any sound being played from pressing F5 & F6, you may want to perform these checks:

• Check that File Type is WAV format
  
• Check if Audio is in Mono not Stereo
  
• Sample Rate should be in 44100Hz
  

Not really official help but you can try. Experienced this problem before and used the above to fix and works.

'

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

[Mark4211]

doorcls.wav and dooropn.wav
should be located in the main folder of the train. It should not be located in other folders such as, car, etc.

If you have doorcls.wav and dooropn.wav
files in the main folder but there is still isn't any sound being played from pressing F5 & F6, you may want to perform these checks:

• Check that File Type is WAV format
  
• Check if Audio is in Mono not Stereo
  
• Sample Rate should be in 44100Hz
  

Not really official help but you can try. Experienced this problem before and used the above to fix and works.

'

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

Really sorry but, I don't understand your English

---

EDIT: Could you post a screenshot of how the items in your own C151 folder look like?

[SBS6016S]

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

Firstly, some things need to be clarified before we can help you further.

1. Have you edited anything in the train folder? (Renaming, replacing, editing, anything at all?)

2. File and folders in this situation make a huge difference, please specify a little clearer.

3. Is there an extra copy of the original C151? (Downloaded straight off the internet and not edited in anyway?) If there is, try running the train and see if it works properly. A file could be corrupted.

[Seangwong]

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

Firstly, some things need to be clarified before we can help you further.

1. Have you edited anything in the train folder? (Renaming, replacing, editing, anything at all?)

2. File and folders in this situation make a huge difference, please specify a little clearer.

3. Is there an extra copy of the original C151? (Downloaded straight off the internet and not edited in anyway?) If there is, try running the train and see if it works properly. A file could be corrupted.

1) I just replaced the dooropn.wav and doorcls.wav file to my own. Then, it doesn't play the sounds anymore.
2) In the extracted folder C151, u open it u
p and you will see the dooropn.wav and doorcls.wav file together with the rest of the sound files etc.
3) Yes I have downloaded it and it works perfectly fine. Its only when I replace the sound file that it does not play anymore.
Thats why I am trying to find out how to make it play again. Is it you have to put the doorcls.wav/dooropn.wav file name in something to make it play?

[SMB142J]

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

Firstly, some things need to be clarified before we can help you further.

1. Have you edited anything in the train folder? (Renaming, replacing, editing, anything at all?)

2. File and folders in this situation make a huge difference, please specify a little clearer.

3. Is there an extra copy of the original C151? (Downloaded straight off the internet and not edited in anyway?) If there is, try running the train and see if it works properly. A file could be corrupted.

1) I just replaced the dooropn.wav and doorcls.wav file to my own. Then, it doesn't play the sounds anymore.
2) In the extracted folder C151, u open it u
p and you will see the dooropn.wav and doorcls.wav file together with the rest of the sound files etc.
3) Yes I have downloaded it and it works perfectly fine. Its only when I replace the sound file that it does not play anymore.
Thats why I am trying to find out how to make it play again. Is it you have to put the doorcls.wav/dooropn.wav file name in something to make it play?

Just put it in the train folder ._.

[c3ph@s(:]

Yes, It all is. Usually u have to put the flie name into some folder so that when u start openbve it will play isnt it? Which flie is that?

Firstly, some things need to be clarified before we can help you further.

1. Have you edited anything in the train folder? (Renaming, replacing, editing, anything at all?)

2. File and folders in this situation make a huge difference, please specify a little clearer.

3. Is there an extra copy of the original C151? (Downloaded straight off the internet and not edited in anyway?) If there is, try running the train and see if it works properly. A file could be corrupted.

1) I just replaced the dooropn.wav and doorcls.wav file to my own. Then, it doesn't play the sounds anymore.
2) In the extracted folder C151, u open it u
p and you will see the dooropn.wav and doorcls.wav file together with the rest of the sound files etc.
3) Yes I have downloaded it and it works perfectly fine. Its only when I replace the sound file that it does not play anymore.
Thats why I am trying to find out how to make it play again. Is it you have to put the doorcls.wav/dooropn.wav file name in something to make it play?

Did you rename the new sound files to "dooropn" for the doors opening sound and "doorcls" for the doors closing sound?
If you didn't the programme will not be able to play the sound as it is unable to trace the file.

Hope this helps you. (:

[TIB1138M]

If all the files are intact then I think it's not about the files problem.

I have this problem also, usually at certain angles of the train we can hear the sound loudly, sometimes we don't hear anything at all.

I think one thing you can do is that you change your angles of your view of the train such as moving up, down, left, right or rotating.

Once you found the appropriate angle of view then it should not be a problem anymore.

Yep, and hopefully I dun sound too much like a moderator

[SMB142J]

If all the files are intact then I think it's not about the files problem.

I have this problem also, usually at certain angles of the train we can hear the sound loudly, sometimes we don't hear anything at all.

I think one thing you can do is that you change your angles of your view of the train such as moving up, down, left, right or rotating.

Once you found the appropriate angle of view then it should not be a problem anymore.

Yep, and hopefully I dun sound too much like a moderator

IMO that isnt a problem. The main problem here is that he cant get the sound file playing.

[C830/C751B/C951 Fan]

If all the files are intact then I think it's not about the files problem.

I have this problem also, usually at certain angles of the train we can hear the sound loudly, sometimes we don't hear anything at all.

I think one thing you can do is that you change your angles of your view of the train such as moving up, down, left, right or rotating.

Once you found the appropriate angle of view then it should not be a problem anymore.

Yep, and hopefully I dun sound too much like a moderator

OpenBVE works like that... It isn't the problem here.

[Seangwong]

Yea, the original C151 works. I have changed the Dooropn.wav and Doorcls.wav sound files to my own but I have renamed it to the same. The thing is that the sounds won't play now... I'll try to get a screenshot and post it soon...

---

If all the files are intact then I think it's not about the files problem.

I have this problem also, usually at certain angles of the train we can hear the sound loudly, sometimes we don't hear anything at all.

I think one thing you can do is that you change your angles of your view of the train such as moving up, down, left, right or rotating.

Once you found the appropriate angle of view then it should not be a problem anymore.

Yep, and hopefully I dun sound too much like a moderator

Thats not the problem. Its only the door opening&closing sounds are not playing.

Fyi, i placed them in the same files as the original.


If lets say, i change the Ext1.5 .bmp files to Ext1.5 .png, i will have to change 1 of the csv files right? For this, do i have to change anything?